"ഘടകം:Namespace detect" എന്ന താളിന്റെ പതിപ്പുകൾ തമ്മിലുള്ള വ്യത്യാസം

പരിഷത്ത് വിക്കി സംരംഭത്തിൽ നിന്ന്
(ചെ.) (ഒരു പതിപ്പ്)
(ചെ.) (ഒരു പതിപ്പ്)
 
(മറ്റൊരു ഉപയോക്താവ് ചെയ്ത ഇടയ്ക്കുള്ള ഒരു നാൾപ്പതിപ്പ് പ്രദർശിപ്പിക്കുന്നില്ല)
വരി 1: വരി 1:
----------------------------------------------------------------------------------------------------
--[[
--                                                                                               --
--------------------------------------------------------------------------------
--                                           NAMESPACE DETECT                                     --
--                                                                           --
--                                                                                               --
--                           NAMESPACE DETECT                               --
--     This module implements the {{namespace detect}} template in Lua, with a few              --
--                                                                           --
--     improvements: all namespaces and all namespace aliases are supported, and namespace      --
-- This module implements the {{namespace detect}} template in Lua, with a   --
--     names are detected automatically for the local wiki. The module can also use the         --
-- few improvements: all namespaces and all namespace aliases are supported, --
--      corresponding subject namespace value if it is used on a talk page. Parameter names       --
-- and namespace names are detected automatically for the local wiki. The     --
--      can be configured for different wikis by altering the values in the "cfg" table.          --
-- module can also use the corresponding subject namespace value if it is     --
--                                                                                               --
-- used on a talk page. Parameter names can be configured for different wikis --
----------------------------------------------------------------------------------------------------
-- by altering the values in the "cfg" table in                              --
-- Module:Namespace detect/config.                                            --
--                                                                           --
--------------------------------------------------------------------------------
--]]


----------------------------------------------------------------------------------------------------
local data = mw.loadData('Module:Namespace detect/data')
--                                          Configuration data                                   --
local argKeys = data.argKeys
--      Language-specific parameter names can be set here.                                       --
local cfg = data.cfg
----------------------------------------------------------------------------------------------------
local mappings = data.mappings


local cfg = {}
local yesno = require('Module:Yesno')
local mArguments -- Lazily initialise Module:Arguments
local mTableTools -- Lazily initilalise Module:TableTools
local ustringLower = mw.ustring.lower


-- This parameter displays content for the main namespace:
local p = {}
cfg.main = 'main'


-- This parameter displays in talk namespaces:
local function fetchValue(t1, t2)
cfg.talk = 'talk'
-- Fetches a value from the table t1 for the first key in array t2 where
-- a non-nil value of t1 exists.
for i, key in ipairs(t2) do
local value = t1[key]
if value ~= nil then
return value
end
end
return nil
end


-- This parameter displays content for "other" namespaces (namespaces for which
local function equalsArrayValue(t, value)
-- parameters have not been specified, or for when cfg.demospace is set to cfg.other):
-- Returns true if value equals a value in the array t. Otherwise
cfg.other = 'other'
-- returns false.
 
for i, arrayValue in ipairs(t) do
-- This parameter makes talk pages behave as though they are the corresponding subject namespace.
if value == arrayValue then
-- Note that this parameter is used with [[Module:Yesno]]. Edit that module to change
return true
-- the default values of "yes", "no", etc.
end
cfg.subjectns = 'subjectns'
end
 
return false
-- This parameter sets a demonstration namespace:
end
cfg.demospace = 'demospace'
 
-- This parameter sets a specific page to compare:
cfg.page = 'page'
 
-- The header for the namespace column in the wikitable containing the list of possible subject-space parameters.
cfg.wikitableNamespaceHeader = 'Namespace'
 
-- The header for the wikitable containing the list of possible subject-space parameters.
cfg.wikitableAliasesHeader = 'Aliases'
 
----------------------------------------------------------------------------------------------------
--                                      End configuration data                                  --
----------------------------------------------------------------------------------------------------
 
local yesno = require('Module:Yesno')
 
local p = {}


function p.getPageObject(page)
function p.getPageObject(page)
-- Get the page object, passing the function through pcall in case we are over the expensive function count limit.
-- Get the page object, passing the function through pcall in case of
-- errors, e.g. being over the expensive function count limit.
if page then
if page then
local noError, pageObject = pcall(mw.title.new, page)
local success, pageObject = pcall(mw.title.new, page)
if not noError then
if success then
return pageObject
else
return nil
return nil
else
return pageObject
end
end
else
else
വരി 67: വരി 65:
end
end


-- Provided for backward compatibility with other modules
function p.getParamMappings()
function p.getParamMappings()
--[[ Returns a table of how parameter names map to namespace names. The keys are the actual namespace
  names, in lower case, and the values are the possible parameter names for that namespace, also in
  lower case. The table entries are structured like this:
{
[''] = {'main'},
['wikipedia'] = {'wikipedia', 'project', 'wp'},
...
}
]]
local mappings = {}
mappings[mw.ustring.lower(mw.site.namespaces[0].name)] = {cfg.main}
mappings[cfg.talk] = {cfg.talk}
for nsid, ns in pairs(mw.site.subjectNamespaces) do
if nsid ~= 0 then -- Exclude main namespace.
local nsname = mw.ustring.lower(ns.name)
local canonicalName = mw.ustring.lower(ns.canonicalName)
mappings[nsname] = {nsname}
if canonicalName ~= nsname then
table.insert(mappings[nsname], canonicalName)
end
for _, alias in ipairs(ns.aliases) do
table.insert(mappings[nsname], mw.ustring.lower(alias))
end
end
end
return mappings
return mappings
end
end


local function getNamespace(args)
local function getNamespace(args)
-- Gets the namespace name from the page object.
-- This function gets the namespace name from the page object.
local page = args[cfg.page]
local page = fetchValue(args, argKeys.page)
local demospace = args[cfg.demospace]
if page == '' then
local subjectns = args[cfg.subjectns]
page = nil
end
local demospace = fetchValue(args, argKeys.demospace)
if demospace == '' then
demospace = nil
end
local subjectns = fetchValue(args, argKeys.subjectns)
local ret
local ret
if demospace then
if demospace then
-- Handle "demospace = main" properly.
-- Handle "demospace = main" properly.
if mw.ustring.lower(demospace) == cfg.main then
if equalsArrayValue(argKeys.main, ustringLower(demospace)) then
ret = mw.site.namespaces[0].name
ret = mw.site.namespaces[0].name
else
else
വരി 113: വരി 93:
if pageObject then
if pageObject then
if pageObject.isTalkPage then
if pageObject.isTalkPage then
-- If cfg.subjectns is set, get the subject namespace, otherwise use cfg.talk.
-- Get the subject namespace if the option is set,
-- otherwise use "talk".
if yesno(subjectns) then
if yesno(subjectns) then
ret = mw.site.namespaces[pageObject.namespace].subject.name
ret = mw.site.namespaces[pageObject.namespace].subject.name
else
else
ret = cfg.talk
ret = 'talk'
end
end
else
else
വരി 126: വരി 107:
end
end
end
end
ret = mw.ustring.gsub(ret, '_', ' ')
ret = ret:gsub('_', ' ')
return mw.ustring.lower(ret)
return ustringLower(ret)
end
end


function p._main(args)
function p._main(args)
-- Get the namespace to compare the parameters to, and the parameter mapping table.
-- Check the parameters stored in the mappings table for any matches.
local namespace = getNamespace(args)
local namespace = getNamespace(args) or 'other' -- "other" avoids nil table keys
local mappings = p.getParamMappings()
local params = mappings[namespace] or {}
-- Check for any matches in the namespace arguments. The order we check them doesn't matter,
local ret = fetchValue(args, params)
-- as there can only be one match.
--[[
for ns, params in pairs(mappings) do
-- If there were no matches, return parameters for other namespaces.
if ns == namespace then
-- This happens if there was no text specified for the namespace that
-- Check all aliases for matches. The default local namespace is checked first, as
-- was detected or if the demospace parameter is not a valid
-- {{namespace detect}} checked these before alias names.
-- namespace. Note that the parameter for the detected namespace must be
for _, param in ipairs(params) do
if args[param] ~= nil then
return args[param]
end
end
end
end
-- If there were no matches, return parameters for other namespaces. This happens if there
-- was no text specified for the namespace that was detected or if the demospace parameter
-- is not a valid namespace. Note that the parameter for the detected namespace must be
-- completely absent for this to happen, not merely blank.
-- completely absent for this to happen, not merely blank.
if args[cfg.other] ~= nil then
--]]
return args[cfg.other]
if ret == nil then
ret = fetchValue(args, argKeys.other)
end
end
return ret
end
end


function p.main(frame)
function p.main(frame)
-- If called via #invoke, use the args passed into the invoking template, or the args
mArguments = require('Module:Arguments')
-- passed to #invoke if any exist. Otherwise assume args are being passed directly in.
local args = mArguments.getArgs(frame, {removeBlanks = false})
local origArgs
local ret = p._main(args)
if frame == mw.getCurrentFrame() then
return ret or ''
origArgs = frame:getParent().args
end
for k, v in pairs(frame.args) do
 
origArgs = frame.args
function p.table(frame)
break
--[[
-- Create a wikitable of all subject namespace parameters, for
-- documentation purposes. The talk parameter is optional, in case it
-- needs to be excluded in the documentation.
--]]
-- Load modules and initialise variables.
mTableTools = require('Module:TableTools')
local namespaces = mw.site.namespaces
local cfg = data.cfg
local useTalk = type(frame) == 'table'
and type(frame.args) == 'table'
and yesno(frame.args.talk) -- Whether to use the talk parameter.
-- Get the header names.
local function checkValue(value, default)
if type(value) == 'string' then
return value
else
return default
end
end
else
origArgs = frame
end
end
-- Trim whitespace and remove blank arguments for demospace and page parameters.
local nsHeader = checkValue(cfg.wikitableNamespaceHeader, 'Namespace')
local args = {}
local aliasesHeader = checkValue(cfg.wikitableAliasesHeader, 'Aliases')
for k, v in pairs(origArgs) do
 
if type(v) == 'string' then
-- Put the namespaces in order.
v = mw.text.trim(v) -- Trim whitespace.
local mappingsOrdered = {}
end
for nsname, params in pairs(mappings) do
if k == cfg.demospace or k == cfg.page then
if useTalk or nsname ~= 'talk' then
if v ~= '' then
local nsid = namespaces[nsname].id
args[k] = v
-- Add 1, as the array must start with 1; nsid 0 would be lost otherwise.
end
nsid = nsid + 1
else
mappingsOrdered[nsid] = params
args[k] = v
end
end
end
end
return p._main(args)
mappingsOrdered = mTableTools.compressSparseArray(mappingsOrdered)
end


function p.table(frame)
-- Build the table.
--[[ Create a wikitable of all subject namespace parameters, for documentation purposes. The talk
  parameter is optional, in case it needs to be excluded in the documentation.
]]
local useTalk = type(frame) == 'table' and type(frame.args) == 'table' and frame.args.talk == 'yes' -- Whether to use the talk parameter.
local mappings = p.getParamMappings()
-- Start the wikitable.
local ret = '{| class="wikitable"'
local ret = '{| class="wikitable"'
.. '\n|-'
.. '\n|-'
.. '\n! ' .. cfg.wikitableNamespaceHeader
.. '\n! ' .. nsHeader
.. '\n! ' .. cfg.wikitableAliasesHeader
.. '\n! ' .. aliasesHeader
for i, params in ipairs(mappingsOrdered) do
-- Generate the row for the main namespace, as we want this to be first in the list.
for j, param in ipairs(params) do
ret = ret .. '\n|-'
if j == 1 then
.. '\n| <code>' .. cfg.main .. '</code>'
ret = ret .. '\n|-'
.. '\n|'
.. '\n| <code>' .. param .. '</code>'
if useTalk then
.. '\n| '
ret = ret .. '\n|-'
elseif j == 2 then
.. '\n| <code>' .. cfg.talk .. '</code>'
ret = ret .. '<code>' .. param .. '</code>'
.. '\n|'
else
end
ret = ret .. ', <code>' .. param .. '</code>'
-- Enclose all parameter names in <code> tags.
for ns, params in pairs(mappings) do
if ns ~= mw.site.namespaces[0].name then
for i, param in ipairs(params) do
mappings[ns][i] = '<code>' .. param .. '</code>'
end
end
end
end
end
end
-- Generate the other wikitable rows.
for ns, params in pairs(mappings) do
if ns ~= mw.site.namespaces[0].name then -- Ignore the main namespace.
ret = ret .. '\n|-'
.. '\n| ' .. params[1]
.. '\n| ' .. table.concat(params, ', ', 2)
end
end
-- End the wikitable.
ret = ret .. '\n|-'
ret = ret .. '\n|-'
.. '\n|}'
.. '\n|}'

21:39, 6 മേയ് 2014-നു നിലവിലുള്ള രൂപം

--[[


-- -- -- NAMESPACE DETECT -- -- -- -- This module implements the {{#invoke:Namespace detect|main}} template in Lua, with a -- -- few improvements: all namespaces and all namespace aliases are supported, -- -- and namespace names are detected automatically for the local wiki. The -- -- module can also use the corresponding subject namespace value if it is -- -- used on a talk page. Parameter names can be configured for different wikis -- -- by altering the values in the "cfg" table in -- -- Module:Namespace detect/config. -- -- --


--]]

local data = mw.loadData('Module:Namespace detect/data') local argKeys = data.argKeys local cfg = data.cfg local mappings = data.mappings

local yesno = require('Module:Yesno') local mArguments -- Lazily initialise Module:Arguments local mTableTools -- Lazily initilalise Module:TableTools local ustringLower = mw.ustring.lower

local p = {}

local function fetchValue(t1, t2) -- Fetches a value from the table t1 for the first key in array t2 where -- a non-nil value of t1 exists. for i, key in ipairs(t2) do local value = t1[key] if value ~= nil then return value end end return nil end

local function equalsArrayValue(t, value) -- Returns true if value equals a value in the array t. Otherwise -- returns false. for i, arrayValue in ipairs(t) do if value == arrayValue then return true end end return false end

function p.getPageObject(page) -- Get the page object, passing the function through pcall in case of -- errors, e.g. being over the expensive function count limit. if page then local success, pageObject = pcall(mw.title.new, page) if success then return pageObject else return nil end else return mw.title.getCurrentTitle() end end

-- Provided for backward compatibility with other modules function p.getParamMappings() return mappings end

local function getNamespace(args) -- This function gets the namespace name from the page object. local page = fetchValue(args, argKeys.page) if page == then page = nil end local demospace = fetchValue(args, argKeys.demospace) if demospace == then demospace = nil end local subjectns = fetchValue(args, argKeys.subjectns) local ret if demospace then -- Handle "demospace = main" properly. if equalsArrayValue(argKeys.main, ustringLower(demospace)) then ret = mw.site.namespaces[0].name else ret = demospace end else local pageObject = p.getPageObject(page) if pageObject then if pageObject.isTalkPage then -- Get the subject namespace if the option is set, -- otherwise use "talk". if yesno(subjectns) then ret = mw.site.namespaces[pageObject.namespace].subject.name else ret = 'talk' end else ret = pageObject.nsText end else return nil -- return nil if the page object doesn't exist. end end ret = ret:gsub('_', ' ') return ustringLower(ret) end

function p._main(args) -- Check the parameters stored in the mappings table for any matches. local namespace = getNamespace(args) or 'other' -- "other" avoids nil table keys local params = mappings[namespace] or {} local ret = fetchValue(args, params) --[[ -- If there were no matches, return parameters for other namespaces. -- This happens if there was no text specified for the namespace that -- was detected or if the demospace parameter is not a valid -- namespace. Note that the parameter for the detected namespace must be -- completely absent for this to happen, not merely blank. --]] if ret == nil then ret = fetchValue(args, argKeys.other) end return ret end

function p.main(frame) mArguments = require('Module:Arguments') local args = mArguments.getArgs(frame, {removeBlanks = false}) local ret = p._main(args) return ret or end

function p.table(frame) --[[ -- Create a wikitable of all subject namespace parameters, for -- documentation purposes. The talk parameter is optional, in case it -- needs to be excluded in the documentation. --]]

-- Load modules and initialise variables. mTableTools = require('Module:TableTools') local namespaces = mw.site.namespaces local cfg = data.cfg local useTalk = type(frame) == 'table' and type(frame.args) == 'table' and yesno(frame.args.talk) -- Whether to use the talk parameter.

-- Get the header names. local function checkValue(value, default) if type(value) == 'string' then return value else return default end end local nsHeader = checkValue(cfg.wikitableNamespaceHeader, 'Namespace') local aliasesHeader = checkValue(cfg.wikitableAliasesHeader, 'Aliases')

-- Put the namespaces in order. local mappingsOrdered = {} for nsname, params in pairs(mappings) do if useTalk or nsname ~= 'talk' then local nsid = namespaces[nsname].id -- Add 1, as the array must start with 1; nsid 0 would be lost otherwise. nsid = nsid + 1 mappingsOrdered[nsid] = params end end mappingsOrdered = mTableTools.compressSparseArray(mappingsOrdered)

-- Build the table. local ret = '{| class="wikitable"' .. '\n|-' .. '\n! ' .. nsHeader .. '\n! ' .. aliasesHeader for i, params in ipairs(mappingsOrdered) do for j, param in ipairs(params) do if j == 1 then ret = ret .. '\n|-' .. '\n| ' .. param .. '' .. '\n| ' elseif j == 2 then ret = ret .. '' .. param .. '' else ret = ret .. ', ' .. param .. '' end end end ret = ret .. '\n|-' .. '\n|}' return ret end

return p

"https://wiki.kssp.in/index.php?title=ഘടകം:Namespace_detect&oldid=5426" എന്ന താളിൽനിന്ന് ശേഖരിച്ചത്